Jump to content

UFO tailight

Recommended Posts

Just recently completed making my 02 DRZ 400E buddy bike street legal. I saw some posts regarding the UFO tailight. There may have been many pics on this before, but here are two more. I left off turn signals, but have used Lockhart flush mount I & II marker lights on the sides of the rear fenders of other bikes and this worked very well and looked good also. If the S version fender is similar it should work there also. One thing I did after installation, was to caulk all the open spaces between the bottom of the fender and top of the cut down UFO tailight. This will keep a lot of mud from collecting in that void. I used the same silicone calk used to stick sidecase covers on, but used the full sized cartridge found at Murrays. It is a very light caulk so not much weight was added.

mywebpages.comcast.net/patterjp/DRZ400a 037.jpg

mywebpages.comcast.net/patterjp/DRZ400a 034.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

  • Create New...