Need some suggestions on upgrades?

[motox-dan]

My B-Day is coming up, and my wife asked me what I would like for my bike. I have the JD jet kit and 3x3 mod done, the case savers, and the Eddie battery mod (in the mail right now). What mods, either mechanical or cosmetic would you do next? Needs to be around $200 or less.

Thanks for all your input!

[bumtarder]

imho i'd look into doing the reliability mods such as the manual cam chain tensioner(MCCT).another is the free power mod for charging system reliability.a set of good radiator guards also comes to mind as well as a good skid plate,hand guards and brake pedal tether especially if you go off-road.did you remember to round off the backside of the gear shifter when you installed the case saver?loctite the primary nut,stator/starter bolts,cs sprocket?i could go on but that should give you enough to think about for now and should be within your budget.

[schwick]

have her pay for half of a full exhaust!! you'll love it

[motox-dan]

have her pay for half of a full exhaust!! you'll love it

lol So it's $400? Maybe I should ask for the $$$ and then save for the rest!

[iowaBClivewire]

imho i'd look into doing the reliability mods such as the manual cam chain tensioner(MCCT).another is the free power mod for charging system reliability.a set of good radiator guards also comes to mind as well as a good skid plate,hand guards and brake pedal tether especially if you go off-road.did you remember to round off the backside of the gear shifter when you installed the case saver?loctite the primary nut,stator/starter bolts,cs sprocket?i could go on but that should give you enough to think about for now and should be within your budget.

2nd this

just add a scots reuseable cleanable SS oil filter ( never need to buy a filter aging)

http://shop.thumpertalk.com/Scott_s_Oil_Filter_p/eng_scotts_ssoilfilter.htm

http://shop.thumpertalk.com/product_p/bp_unabiker_radguard.htm

http://shop.thumpertalk.com/Manual_Cam_Chain_Tensioner_p/eng_tt_mcct1.htm

http://shop.thumpertalk.com/ThumperTalk_Skid_Plates_p/bp_tt_skid.htm

throw in some $50 moose alunam handel bars and you will have a bike that is damn near bullet prufe