Jump to content
Sign in to follow this  

ebay stroker crank

Recommended Posts

saw this on ebay.over 100 bux cheaper than getting it from hotrods site http://cgi.ebay.com/ebaymotors/05-08-Suzuki-DRZ400-5mm-Hot-Rods-stroker-crank-430cc_W0QQitemZ250271442654QQcmdZViewItem?hash=item250271442654&_trksid=p3286.m14.l1318

what do do you think, good deal or maybe its not?he has not emailed me back yet(been more than a week)

Share this post


Link to post
Share on other sites

270$ is about retail for the stroker crank.

Share this post


Link to post
Share on other sites

hotrods wants $374 for the stroker and $295 for the stock stroked crank.

Share this post


Link to post
Share on other sites

I wouldnt buy directly from Hotrods when you could find a reseller offering it for much less.

Share this post


Link to post
Share on other sites
hotrods wants $374 for the stroker and $295 for the stock stroked crank.

I just realized that they also make a stock crank for $295 which I confused for a stroker, sorry.

270$ for the stroker seems like a deal.

Share this post


Link to post
Share on other sites

I think you can use any bore as long as you have either a stroker piston or a spacer so that the piston won't contact the valves or the case. I have the JE kit from lukes http://www.lukesracing.com/luksr/bbkits.html it's the 470 kit with 94mm topend and the stroker crank. 30cc on the crank 40cc on the bore, the spacer route I hear is less reliable because of an added gasket but eddie sells and makes them so I would take his word over any local advise. I had a little binding issue with the stroker piston and the rod but I was able to work it out with a file and it worked fine.

Share this post


Link to post
Share on other sites

I had bought mine from http://cgi.ebay.com/ebaymotors/_Motorcycle-Parts-Accessories__SUZUKI-DRZ400E-5MM-STROKER-CRANKSHAFT-KIT-DRZ-400E-400S_W0QQitemZ360070530086QQadnZMotorcycleQ20PartsQ20Q26Q20AccessoriesQQadiZ2863QQcmdZViewItem?_trksid=p3756.m20.l1116

. Great item but when i had a problem with the stroker piston they didn't answer me (see http://www.thumpertalk.com/forum/showthread.php?t=570359 )! About yours, it surprises me that they refer "stock piston", you should make that clear! It's impossible to use stock piston with this crank and without a spacer:bonk: !

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×