Jump to content
Sign in to follow this  

Need Help With FCR Install

Recommended Posts

I picked up a old style fcr with both boots from a e model for my s model. I have the boot on the cylinder but cant get the carb to drop down far enough to line up with the boot.The coast bracket on the bottom hits the starter before it even gets close to level. I read up on this and thought it fit.

Share this post


Link to post
Share on other sites

Post a picture. It fits right on. Not sure why you are having a problem. CE is on the left side, not the bottom.

Share this post


Link to post
Share on other sites

It has a blue pull knob and a hose on a bracket below the carb bowl that hit on top of starter. I'll try and post pics tonight.

Share this post


Link to post
Share on other sites

I suspected that. Hot start - kick start- no starter motor - no problem.

The carb is from a "DR-Z400" not "DR-Z400E". Just remove the hot start and seal off the hot start ports.

Share this post


Link to post
Share on other sites

Thanks for the help guy..Alba action shows the same carb with the hot start on the kick and e models,must be a misprint..

It will look better and easier to adjust without that stuff..

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...