Jump to content
Sign in to follow this  

Anyone know

Recommended Posts

Does anyone know how to rebuild the cheap chinese pit bike shocks?

No piggy back reservoir, so I am guessing to remove the air schrader at the top, bleed the fluid, then press in the bottom of the shock, hopfully remove any snap ring there.....and do it like a normal shock....?

Share this post


Link to post
Share on other sites

i refuse doing them - (for me) too much work for too much pontential trouble.

and if you ruin something it's very likely you don't get any parts that easily - if at all.

Share this post


Link to post
Share on other sites
i refuse doing them - (for me) too much work for too much pontential trouble.

and if you ruin something it's very likely you don't get any parts that easily - if at all.

good advice...I was really hoping to add some rebound damping...but if they are not worth the effort...I am not going to do it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...