Jump to content
Sign in to follow this  

ssr 125-sx

Recommended Posts

Ive seen a few of these bike around at the races Look to be a decent entry level race bike its a 50 based bike with a alloy frame

Frame Type: Split rail alloy

Engine Type: 4-stroke, Single Cylinder, Air Cooled

Starting: Kick Start

Bore x Stroke: 54 x 54mm (125)

Compression Ratio: 8.5:1

Carburetion: Mikuni 22mm

Transmission: 4-Speed 1-down, 3-up

Final Drive: Chain

Front Suspension: U.S.D. Adjustable 5.5" Travel

Rear Suspension: 275mm Shock W/Adj. Rebound

Brakes: F&R Wavy Rotor Discs Brakes

Front Tire: 12"

Rear Tire: 10"

L x W x H (inches): N/A

Seat Height: 29in.

Wheelbase: 43in.

Ground Clearance: 10/12in.

Fuel Capacity: 1.0gal

Dry Weight: 136.4lbs

SR125-SX_L.jpg

Share this post


Link to post
Share on other sites
has anyone had personal experince with them?

I have worked on the 54X54 (125cc) Motors the older Versions, But heard from Jeremiah @ Staggs/SGR Racing that they have had a shifting upgrade (Improvement) and very good results

also I have serviced about 10 sets of the forks that come on those bikes..100% better when Serviced (fluid change)

other than that just what ive seen at the Track...:)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...