E Cam Install Slight Problem Eddie need Help !

[artm3]

Installed a set of E cams today.

Everything went well with the install All aligned nicely.

Bike seems sluggish on low end with a slight Bog in beginning of throttle.

Almost like it's cold or something.

I have an FCR MX (TT) with a 160 MJ EMR Needle #3

E Base Gasket

Full Yosh RS3 Stainless

Valves are a little noisey

Intake L .16 R .16

EX L .28 R .27

Eddie can you Help?

[artm3]

also forgot to mention that I have some heavy popping on decel

[William1]

Bike idles fine?

No other changes done other than the cams?

[artm3]

Idles fine no other changes

[DualSportDad]

maybe the added air flow needs to have added fuel? poping on decel means it's running lean.

[iowaBClivewire]

drive it a little more the tork curve is different enef that you need to get used to it

[Wayward Son]

vacuum line connected to the petcock?

[William1]

Did you do the O-Ring mod, cherck the AP timing as outlined here:

O-Ring Mod and AP Tuning

[artm3]

Yes on the vaccum line

Yes on the Oring Mod

[Wayward Son]

id revisit the cam timing.

[artm3]

will do !

Thanx