Jump to content
Sign in to follow this  

fly wheel

Recommended Posts

hey, i have a kx 100 and im tring to get the fly wheel off and i called 2 dealers for the part and they said it would be 230$ for the fly wheel holder:banghead: is thier a way to get it off without the tool:excuseme:

Share this post


Link to post
Share on other sites

all you need is 2 long bolts that fit the outside holes and a screw driver to slide between them and hold them as a wedge, the use a socket to remove the nut, you can also buy a steering wheel puller from napa use 2 long bolts and slide the ratchet extension thru the cinter bolt hole then put back on the socket to remove it, and there is about 10 other ways without a special 200 dollar tool, fyi the sterring wheel puller will also work as a case splitter and a flywheel remover, and bearing puller with just a mixture of different bolts and nuts and washers, the steering wheel puller cost 11 bucks at napa,

some grinding may be required depending on your bolt lengths.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...