I have an 04 wr 450. Went to go riding this morning and my clutch would not engage nuetral. Bike started and runs great, but the clutch just won't engage. I tightened the clutch cable and made sure it was working down on the case. cable appears to be working fine. The other thing I noticed is when I pull the clutch in(in first gear), it does release the gear but only slightly. Meaning, the back tire isn't fully locked out, as it does when the clutch is released. I've never had any warning that my clutch was slipping or having any other problems. Any suggestions before I do the old tear down to see if the clutch plates are worn. I am new to this bike, So I thought I would ask before opening the wallet.