Nitrous On My Drz

i intend to nitrous my drz any thoughts?

i intend to nitrous my drz any thoughts?

Would like to hear abot the result :D

Do It

get your self a wideband a/f meter and have at it.

Start with a little shot and work your way up. Too much nitrous and not enough fuel will be costly.

yeah there was a thread a while back about somebody wanting to spray their DRZ.

why would you ????? going to do some hill climbing -drag racing ???? get some HP thats more fun dont spray

GO 4 IT! U only go around once. It might as well be like a bat out of hell!!

I've thought of this before. Why not get Nitrous that comes in little shots like C02 cartridges? Maybe good for three or four shots. You'd need an electric valve with a precise timer to meter out the exact amount per shot. I'm gonna think about this. Problem is, I'm not gonna experiment on my new DRZ.

Did you get it started?

The perfect place for my first post. I just picked up a 07 400 s.

I have 2 nitrous street bikes in the garage. (03 ZX12,05 Busa)

I have all ready been asked when i will be spraying the drz.

Start very conservative and good luck. Can't wait to see how this works out boys got too much time on your hands......

let me know how it goes.....interested.

How do you puncture it and get it in a balloon? Its been a long time since I killed brain cells with whippets.

interested in a pic of the ZX 12 & the GSX 1300 R

How do you puncture it and get it in a balloon? Its been a long time since I killed brain cells with whippets.

The finer head shops sell the plastic adapter. Install balloon. Place whippit into adapter turn adapter all the way in. Turn adapter the opposite direction to release gas. Remove balloon. Do dentist kill brain cells?

What is the 'supercharged' ones? Any difference?

What is the 'supercharged' ones? Any difference?

More of the good stuff so will be better to convert for DRZ use

interested in a pic of the ZX 12 & the GSX 1300 R

Here you go...the12


Single stage dry shot,USB,map switch,ignition module,akra,shift light,co2 shifter,couple inch's in the arm.

The Busa



2 stage dry,USB,map switch,ignition module,brock,shift light,c02 shifter,1.75'' arm.

I bought the drz to keep me out of trouble...

you are a nut my friend. AND I LOVE IT!!!! KEep it comin. This is what they mean by speedfreak. That busa is real keen man.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Bgringo
      I've read a lot of threads about this but still haven't found exactly what I'm looking for.  I'm pulling my 2004 DRZ400S out of storage sometime this week and getting it ready for the season.  I live at 9,000 ft, but my first ride of the year is probably going to be at around 5,000 ft.  I was going to pull the 145 main jet I'm running and put in the 150 adjusting the needle from the 2 clip to the 3rd, then re-jet once I got home.  I already have the extended fuel mixture screw in place so I started thinking that I should just run the 150 jet set up and adjust the fuel screw to compensate for the higher elevation where I'll be doing most of my riding.  I will be going down in elevation for rides until late May or June depending on snowfall, but riding on the street when I'm able.  Are there any disadvantages with this?
      I'm new to posting on this forum, so please forgive me if I didn't get the right search words in and there is already a post about this.
    • By Markl5557
      I am currently running 10w 40 Belray non synthetic and I want to switch to full synthetic amsoil .... is it ok to switch from regular to synthetic? I have read it’s not safe to go from synthetic to regular can someone explain if it’s safe to go from regular to synthetic!? Thanks !
    • By RockyMtnMark
      Good Morning,
        Last night I measured my valve clearances for the very first time (I know...) on my DRZ400S.  It's a 2002 and I've owned is since 2011.  I bought it with t's got about 15,000 miles on it and most of it's miles these days are on dirt.
      Intake specs are 0.10-0.20 mm.  Exhaust specs are 0.20-0.30
      My intake valve clearances are in spec, forgot to write them down.  My exhaust valve clearances are between 0.1778 and 0.2032 which is slightly out of spec.  They are no more than 25 microns out of spec.  My question is, do I really need to shim these?  Will this kind of out-of-spec cause performance, mechanical, or other losses?  As far as I can tell, I'd have to buy a whole shim kit which is like $80.  Thanks!
    • By Zach440
      Selling my 2009 Drz400sm. Been a great bike but it’s time to let go . Not looking for any trades - spring is just around the corner ! Located in northern Virginia . Cash only $4200- willing to negotiate I have some wolfman luggage options available as well. Love to make a package deal for someone 

      -11640 miles . Mild off-road never wrecked.
      -Oil / filter changed every 1500 miles
      -New did chain , brake pads , front sprocket at 10400 miles .
      - valves checked and within spec at 10,000
      - jetted with JD kit and 3x3 mod
      -doubletake mirrors
      -waterproof usb wired and located next to Speedo
      - drc large foot pegs , barkbusters with integrated turn signals . 12oclocklabs tall delete with upgraded circuit board
      -thumpertalk case savers
      -sergeant seat (amazing) and Clarke 3.9 tank (190mile range )
      - fog lights wired in so they shut off with high beams
      -Shorai lithium battery
      -led headlight

      - stock gas tank and seat will be included

      The bike is dirty in photos and I apologize my water is currently disabled outside due to freezing temps . Radiator guards and skid plate NOT included but can be for some extra $$. Rear tire could be replaced but front is fine .
    • By tplayer100
      Currently have a 2000 drz400s work stock suspension. From my understanding this is the worst suspension the drz ever came with without even rebound damping adjustment. Therefore I'm looking for a upgrade. I'm seeing three approaches to take. First being a newer year s model suspension with dampening adjustment. A SM model USD forks and triple tree or some USD forks and triple tree from a rmz. So if you were going to upgrade what direction would you go. I currently ride off-road mostly but I do have some 17s for on road with as well so have to keep that in mind. Thanks