My 03 Wr450 dirt to street project

[jhmotard]

dude get some black pro tapers! $60 for bar and $40 for clamps

[BSR-1]

dude get some black pro tapers! $60 for bar and $40 for clamps

these are "fatter" than protaper. they are the fattest bars currently made. I guess that's why they can charge a little extra.

gotta pic of the protaper clamps?

[crazyz250]

update

I'm waiting for my swingarm bearings they should be here by the end of the week. I deff wants 7/8 bars where in the world can you get a top clamp for $40? from what i have seen its about $200 for a bar and clamp combo

[lixno]

Turning out beautiful!

[blumtnman]

The headlight will fit, you just have to use cable ties on the bottom 2 mounting holes.

I have one fitted to my '04

Very sweet indeed.?

[nori41]

Looks good

[rm250ztc]

can't wait to see this thing done, love the flat black

[ktmnick909]

how much did the powder coating run you ?

[crazyz250]

$450 for everything

$370 for just the bike parts

everything was sand blasted first, such a smooth finish

http://www.powdertechinc.com/

they did the work

[jhmotard]

your catching up to me!! i've been lazy hehe

[crazyz250]

your catching up to me!! i've been lazy hehe

haha i would have alot more done if my stupid swingarm bearings would get here. Once i get most of the hard parts on im going to tackle the wiring. The baja designs kit is great, but it has lots of extra wire and is basically its own system, designed to fit on as many bikes as possible. I want to rip the whole thing apart and re-wire it all, basically a wire tuck haha and move some things around so my tank and battery fit better. Once i hit this part its going to be awile before i get the full body on.

- I am also going to make a mount for my valentine radar to sit just above the headlight and a license plate frame to mount on the axel.

- What kind of taillights do you guys use? I have a led tail and turn signals but i want a cleannn look. I want either a hayabusa or SV650 taillight. Both have the turn signals in the taillight its just a matter of making them work and mount up

busa: http://cgi.ebay.com/ebaymotors/Hayabusa-Clear-Intergrated-LED-Turn-Signals-Tail-Light_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem120338283637QQitemZ120338283637QQptZMotorcyclesQ5fPartsQ5fAccessories

SV: http://cgi.ebay.com/ebaymotors/03-08-SUZUKI-SV-650-SV-1000-LED-TAILLIGHT-TURN-SIGNALS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem350146041684QQitemZ350146041684QQptZMotorcyclesQ5fPartsQ5fAccessories

SV would look NASTY once i mount it up. votes please

- where can i get my front fork tubes anodized? everything is going to be black, and then gold fork tubes lol not happening. any ideas?

I have about 3 months until it warms up here in NY so i am in no rush, but i really do want to

[nori41]

haha i would have alot more done if my stupid swingarm bearings would get here. Once i get most of the hard parts on im going to tackle the wiring. The baja designs kit is great, but it has lots of extra wire and is basically its own system, designed to fit on as many bikes as possible. I want to rip the whole thing apart and re-wire it all, basically a wire tuck haha and move some things around so my tank and battery fit better. Once i hit this part its going to be awile before i get the full body on.

- I am also going to make a mount for my valentine radar to sit just above the headlight and a license plate frame to mount on the axel.

- What kind of taillights do you guys use? I have a led tail and turn signals but i want a cleannn look. I want either a hayabusa or SV650 taillight. Both have the turn signals in the taillight its just a matter of making them work and mount up

busa: http://cgi.ebay.com/ebaymotors/Hayabusa-Clear-Intergrated-LED-Turn-Signals-Tail-Light_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem120338283637QQitemZ120338283637QQptZMotorcyclesQ5fPartsQ5fAccessories

SV: http://cgi.ebay.com/ebaymotors/03-08-SUZUKI-SV-650-SV-1000-LED-TAILLIGHT-TURN-SIGNALS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem350146041684QQitemZ350146041684QQptZMotorcyclesQ5fPartsQ5fAccessories

SV would look NASTY once i mount it up. votes please

- where can i get my front fork tubes anodized? everything is going to be black, and then gold fork tubes lol not happening. any ideas?

I have about 3 months until it warms up here in NY so i am in no rush, but i really do want to

Leave the forks gold, nice contrast. Too much black and you'll start to look like Streethawk

[crazyz250]

Leave the forks gold, nice contrast. Too much black and you'll start to look like Streethawk

hmm true never thought of it that way. i could always change them later if i dont like it. cheeper this way too

[crazyz250]

Finally got my wheels in the mail yesterday so i decided to mock up the front end. I will be ordering a black top clamp and 7/8's bars tonight, along with some sort of front brake rotor. back tire is a 160!!!! its huge, these pics dont do it justice

[fastkevin]

update

Dude! Your swingarm pivot bolt.. Has it ever seen grease? Might wanna take that thing back out, vigorously apply some steel wool to it, and then generously lather that puppy in some water-proof grease.

[BSR-1]

Dude! Your swingarm pivot bolt.. Has it ever seen grease? Might wanna take that thing back out, vigorously apply some steel wool to it, and then generously lather that puppy in some water-proof grease.

good eye!

[klossWR450]

really like the all black idea!! you might have to trim side of that 160 tire to prevent chain hitting it, I have 150 on mine and the edge is chewn, there was a thread in WR forum where guy is offering chain guide with side walls to protect wheel and frame

[crazyz250]

Dude! Your swingarm pivot bolt.. Has it ever seen grease? Might wanna take that thing back out, vigorously apply some steel wool to it, and then generously lather that puppy in some water-proof grease.

haha oh i know, i just put it in so i could torque down the rest of the motor mounts. when i finally get my damm swingarm bearings i can put the swingarm on. believe me i have a giant tub of maxium bearing grease

really like the all black idea!! you might have to trim side of that 160 tire to prevent chain hitting it, I have 150 on mine and the edge is chewn, there was a thread in WR forum where guy is offering chain guide with side walls to protect wheel and frame

yea i knew it was going to rub. Whats that guys name ill send him a pm thanks

[nori41]

haha oh i know, i just put it in so i could torque down the rest of the motor mounts. when i finally get my damm swingarm bearings i can put the swingarm on. believe me i have a giant tub of maxium bearing grease

yea i knew it was going to rub. Whats that guys name ill send him a pm thanks

Graves sell them. It may fit your WR

http://www.gravesport.com/cgi-bin/shopper?preadd=action&key=SGY_06YZ-K

[crazyz250]

yea i saw the graves one but couldn't find one to fit my bike. that just means ill have to make it fit