Jump to content
Sign in to follow this  

Indiana riders may want to look....

Recommended Posts

Dugger is scheduled to be opened up june 7th. For those of you who live in Indiana that don't know what this is, Dugger is a little town in Greene County. It is really close to Linton. The riding area is on old coal mine land, previously owned by Amax coal company. The riding area is actually about half way in between Dugger and Linton. They started mining it in the 60's sometime and ran out of coal in the early 80's. Every since then, it has been a haven for offroading.

I would guess there is somewhere around 3000 acres, maybe more, of the best riding in the Ohio Valley. The outlying trails are going to be for 4x4 trucks and jeeps, and every thing else is supposed to be for bikes and quads. There are some of the biggest, steepest angled hills I have ever seen there. Here is the link to the DNR website. Indiana Dept. of Natural Resources It is actually called the Redbird project. Your bike will have to be registered as an offroad vehicle before you can ride there though. It is only $6 for 3 years. The form is on the page to send in. If you can't find it, email me and I will email it back. Looking forward to seeing all you Indiana riders there for the opening day, (and maybe before then )

Share this post


Link to post
Share on other sites

DRz400e:

It should be a great day,,, It is also Trail Days.. I went last year and it was a blast. I met alot of nice people and we all had a great day.

D.I.R.T (Discover Indiana Riding Trails) and some of the Off-Road clubs + the DRN are responsible for this opening.

Share this post


Link to post
Share on other sites

Can you register and ride the Redbird project from out-of-state when it opens, or is it an Indiana residents only deal?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By 661Bran28den661
      What’s up guys. Totally new here picked up an XR400R I live in the desert so I’m riding often and enjoy it. But I am having some issues with my  01 XR400R. I brought it out this morning for a putt and it seems to be choking up in the top of second. Like a bog an go bog an go. First seemed fine and third I didn’t make it high enough into the rpms to see. Before I brought it back to the garage. Yesterday I also changed the air filter back to an uni. I had seen the other one had a hole in it and the box was dirty gunned up and oily. I removed the airbox gave it a good clean out wiped everything down very well put a piece of screen over the snorkel Or where it used to be I should say. “Lightly oiled the filter.Also the spark arrester an tip for the bike it did not come with I ended up making one with a piece of flat steel and drilling holes. Whilst doing this. I found also a crack in the pipe. It almost sounds as like there’s a vacuuming or whistle? When revving.The first one I had made worked fine I had no issues. This one I am wondering maybe if it’s a cause of a little too much back pressure.So I’m assuming it’s either a Carb or exhaust problem. Or something that could totally be minuscule. Or major issue. Would definitely like some second opinions and any advice would be greatly appreciated. Thanks guys! 
      TWISTIN THROTTLES & CRACKN BOTTLES


    • By ddickinson
      My lanky 14 year old boy started showing an interest in riding MX/Off-Road so I sourced the best beginner friendly, yet dirt worthy, bike I could find: an Ol' Honda XR250R (2004). So far I've replaced a few clutch levers and perches with stock parts. That's gotten old and I'm looking to upgrade to an ASV or Torc1 type fold-able clutch/perch brake combo. Went to purchase online today and to my surprise there were no such parts listed for the XRs. I saw plenty of CRF/CRF-X choices and they seem to differ depending on generation. Obviously I can use nearly any perch/clutch combo as long as the two match; but I was wondering if anyone knew which of these levers was closest to stock? Also, will the first gen CRF250X brake lever work on the XR? These may be stupid questions to some; but I'd rather ask a dumb question than drop money on an ASV brake lever I can't use. Thanks for any help.
      #xr250r#hondaxr  
       
       

    • By TheLastByte
      Im currently in the market for an xr400r, and considering buying one that's had some heavy engine work done. The current owner claims to have bought it from a friend who's an XR enthusiast. The PO installed a big bore kit and high comp piston, as well as a xrs only pumper carb, rsw triple clamp, aftermarket clutch, street lights, and a whole bunch of bling.
       
      My main concern is the effect the upgrades will have on the engine's longevity. How much quicker will I be going through top ends with the setup on this bike as opposed to a stock setup, and should I be worrying at all about bottom end longevity as well? I wouldn't mind having to eventually redo the top end, but I don't want to deal with a race bike type top end rebuild schedule on an XR. 
      Is there anyone here who's running a bike similar to this one who can give some advice? 
    • By Ralph303
      I have a 2001 Honda XR400R. It has a whirring/grinding sound in the lower end and a vibration in the top end. I pulled the valve cover and everything looks good. Decompression lever looks to be in order. Anyone know where I should start looking or just rebuild the whole engine. Ballin on a budget, but really love this bike. It looks like it’s new otherwise. Oil was jet black and thin. Thanks in advance! 
    • By junglePIG
      Hi, I have an Xr250r with a buckled/ wobbling front wheel, after trying to true the rim i have broken a spoke.
      I am wondering if it is possible to lace any 36 hole aftermarket rim to the oem hub, also will i need to buy an xr250r specific spoke set. also could i take a 36 hole rim from another front wheel and lace that up???? thanks
×