is 03 xr400 choke plate better than

hi guys.

new to forum ,and dirt biking but love it.

i just bought a 03 xr400 and have noticed people talking about choke plate breakage.

even as ignorant as i am about engines that doesnt sound good.

is 96-04 all the same choke plate or has honda improved that problem .

i know i can replace with xr only plate but if its not needed because of improvement by 03 that would be great.

thanks for the help for the newbie .

All of the XR400R Choke plates are the same--no "improvements" have been made.

Just buy one from XR's Only or Precision Concepts, install it and forget about it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • By libsead
      Guy's,  I have an 1997 Honda XR400R and I need to do the front forks.  I'm a big guy 6'4" 375lbs.  So far I haven't been able to find a setup for a big guy. Any suggestions besides losing a lot of weight. :-)
    • By Scat Adams
      OEM Rear fender from an XR400. Fender includes Baja Design tail light as well. 
       
      $20 plus shipping, located in San Diego. 
    • By Alex John Blanch
      Went riding on Christmas Eve  everything was working fine went through some mud and slipped dropped my bike tried to kick start it and the kick start went limp pushed it back up got compression again  kicked it over a bunch of times started to run again  rode it for the rest of the ride with no problems then on the way back on the road I gave it fill throttle  and it died hasn't started  since and now has little compression. Replaced the spark plug and changed the oil and filter and adjusted the valves but still very little Compression and won't start.    
      Any ideas??  Would greatly appreciate

    • By Ricky Bobby 21074
      I have a 1986 xr250r, I'm interested in converting the rear drum brake wheel assembly to a rear disc brake system. Has anyone done this, and can you tell me what application parts will get the job done. thanks