Jump to content
Sign in to follow this  

Chain Help please

Recommended Posts

Ive rounded off a lock screw on my chain:foul: any tips on removing it?

Left side, 30 mm Axel bolt loosens fine

Left side lock nut looses fine

Left side Adjust nut fine

Right side Lock Nut pain in the ASS!

Mucho appreciated

Share this post


Link to post
Share on other sites

When u get it unstuck besure to grease it really well with wheel bearing grease to prevent any other seizing.

Share this post


Link to post
Share on other sites

you can also use Anti Seize- that is something dont mention in any manual but should be done when you grease the bearings before you ride it, which they dont mention in the manual either

Share this post


Link to post
Share on other sites
Ive rounded off a lock screw on my chain:foul: any tips on removing it?

Left side, 30 mm Axel bolt loosens fine

Left side lock nut looses fine

Left side Adjust nut fine

Right side Lock Nut pain in the ASS!

Mucho appreciated

If it is the lock nut you rounded off using a 12 mm open-end wrench, which I have done before, here's how I removed the nut. I removed the rear wheel and axle blocks so that I could use a deep 12mm socket as it will slip over the 10 mm hex head adjustment bolt. This worked for me as I had only rounded a couple of the corners on the 12 mm lock nut and the socket was able to engage the remaining corners on the nut. Hope this helps...:busted:

Share this post


Link to post
Share on other sites

Thanks for the feedback guys!! ive resolved the problem by

Loosening 30mm Axel bolt

Loosen Left Lock nut

Loosen Left Adjustment,

Now i just unscrewed the right hand adjustment screw and realigned and tightened up.

JOBS A GOODUN

REGARDS

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×