Jump to content
Sign in to follow this  

drz400sm fcr carb jetting???

Recommended Posts

ok I have a 05 drz400sm and just got a new fcr39mm carb for it . the bike has full yosh, exhaust 3x3 air box modd and a k&n filter what jetting should I use?

Share this post


Link to post
Share on other sites
ok I have a 05 drz400sm and just got a new fcr39mm carb for it . the bike has full yosh, exhaust 3x3 air box modd and a k&n filter what jetting should I use?

Is it a mx or a std fcr from a drz-e model ?

Share this post


Link to post
Share on other sites

the carb is new the person I got it from had 3 of them that he got from a bike shop closing. i would say it is in mx carb,he wasnt sure what bike it was for but I see that the tps is the same as my drz. it has choke but no hot start.

Share this post


Link to post
Share on other sites

Do you have the right bell for the air boot?

If it is a MX (Box it came in should say) then:

Remove the #100 Slow air jet from the carb mount

EMN needle, clip #3

45 Pilot jet, 2 turns on the fuel screw

160 Main jet

Do the oring mod.

Share this post


Link to post
Share on other sites

ok I'm haveing a hard time finding the jets and or neddle kit that I was told to use.:excuseme: I looked in The TT store and all they had was the JD kit I found a kit (http://www.dynojet.com/pdf/3111.pdf) but this dosnt contane the parts that I was told to use.... ok dose any one have what I will need to do the jetting for my bike.:smirk:

Share this post


Link to post
Share on other sites

well after a 5 month breather......

still havent really answered the questions.......

type carb?

removable intake bell?

what jetting is currently in it?

got a pic?

if you have a compatible carb you need this stuff

to make it work.

- 021-216 FCR Adapter 2 3/8", carb to S airboot

- 021-439 Adaptor O-Ring

- 017-262 EMN Needle

- 021-012 Airboot adapter bolts (2)

can get from sudco...

- P/N 13111-29F00 OEM Suzuki E Intake Manifold

- P/N 09402-58208 OEM Suzuki Clamp

- P/N 13685-29F00 OEM Suzuki Vacuum Port Nipple

can order from TT store or stealership

as for the jets, check around the local dealers.

fcr's are on a lot of Mx bikes

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×