Jump to content
Sign in to follow this  

525exc high altitude jetting

Recommended Posts

i just bought a used 2005 525exc. it looks like it might have a paint faded JD blue needle in it. the current set up is:

1- does any one know the jetting suggestions that come with the 525 JD jet kit?

2- are the RED and BLUE needles in a jd kit the same for all FCR carbs/bikes? ie, is the red needle from a wr450 the same as the red needle im missing?

3- is there a 525 jetting data base? (like the drz one)

i need a good high altitude base setting. 4000-8000ft 15c(60f)to 25c (80f)

thanx for any help

simon

Share this post


Link to post
Share on other sites
i just bought a used 2005 525exc. it looks like it might have a paint faded JD blue needle in it. the current set up is:

1- does any one know the jetting suggestions that come with the 525 JD jet kit?

2- are the RED and BLUE needles in a jd kit the same for all FCR carbs/bikes? ie, is the red needle from a wr450 the same as the red needle im missing?

3- is there a 525 jetting data base? (like the drz one)

i need a good high altitude base setting. 4000-8000ft 15c(60f)to 25c (80f)

thanx for any help

simon

Paint faded blue needle 3rd groove from the top

170 main jet

small oring over accell pump linkage

1.25 turns out on fuel air screw.

Share this post


Link to post
Share on other sites
small oring over accell pump linkage?

Yes. The directions come in the JD kit. Somebody might be able to post a copy of the instructions for you.

Share this post


Link to post
Share on other sites
thank you!

i saved the picture and enlarged it ut it is kinda blurry!

can you please email the scan in a bigger format?

simon8965@hotmail.com

Email photo sent. Just click on the small photo and open it with

your own photo software.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×