Jump to content
Sign in to follow this  

Jetting Again!

Recommended Posts

02 wr426, no lid, uncorked..

just installed OBELN on clip 3

158 MJ

38 PJ

2 1/2 turns out.

300 - 1600 elev.

The engines chokes when cracking the throttle, but with a little rev first, it jumps to life. I do have the Bk set at 1/2 a second.

Are these settings close or what will I need to change. Your input would be very helpfull.

Thanks in advance to all that reply...

Share this post


Link to post
Share on other sites

WHAT MAIN 'AIR' JET AND PILOT 'AIR' JET SIZES ARE YOU RUNNING. THE MAIN AND PILOT JET SEEM PRETTY CLOSE TO THE NORM' BUT ONLY IF YOU HAVE A 160 MAIN AIR JET AND A 65 PILOT AIR JET. IF YOU STILL HAVE THE ORIGINAL AIR JETS YOU WILL PROBABLY BEING GETTING A LEAN BOG OFF IDLE.

Share this post


Link to post
Share on other sites

HaremScarem

Try putting the stock 42 pj & 165 mj back in with the ELN. May have to go clip #4

Guy

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×