Jump to content
Sign in to follow this  

Jet size advice

Recommended Posts

I am about to perform Daves Mod to my 2006 XR650L,

I am not a mechanic by any means, but after reading all the helpful advice on the forum, I think I have a good grasp on what to do.

just a quick question tho... what size jets should I be running?

I will be also performing these mods & installs at the same time

I am at sea level

I have an XR's only full exhaust that will be installed

I have the smog block off kit to be installed

I will be using a UNI Filter

I will be removing the snorkel

Thanks in advance for your help!

Share this post


Link to post
Share on other sites
I am about to perform Daves Mod to my 2006 XR650L,

I am not a mechanic by any means, but after reading all the helpful advice on the forum, I think I have a good grasp on what to do.

just a quick question tho... what size jets should I be running?

I will be also performing these mods & installs at the same time

I am at sea level

I have an XR's only full exhaust that will be installed

I have the smog block off kit to be installed

I will be using a UNI Filter

I will be removing the snorkel

Thanks in advance for your help!

I'm at sea level here in Naples,Fl. , and I'm running a 55 pilot jet and a 160 main jet , 2 1/4 turns out on the air screw and with snorkel on the air box removed. It runs like a whole different bike:ride: :p

Share this post


Link to post
Share on other sites

Try one or two sizes up from the Dave's Mods baseline of 58/158, so maybe try 60/160 or 62/162 and go from there.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×