Jump to content
Sign in to follow this  

UNI filter w/part number for 26-28mm carbs

Recommended Posts

This information may have been ran into the ground here in the Pit Bike forum? I searched and didn't find a thread that specifically listed the part number for a UNI filter that will work with PE, PWK and VM, or most any carb that measures from 1.75 - 2" diameter at the intake side. I found this one and it worked well for me today.

It's an "Angled" filter that tucks in a bit more than most, and a lot more than the stock filter that came on the OGM, which is probably the same as many other bikes. If you want the one that is angled, you HAVE to get the 4200 "ast". The straight model is a 4200 st.

Hope this helps anyone looking for a usable UNI filter that give you a little more leg room.

uni.jpg

uni1.jpg

uni2.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×