Jump to content
Sign in to follow this  

Jetting Done, Woo Hoo, now rough idle

Recommended Posts

Greetings guys

I have a Dec 2008 DRZ400 SM.

I have removed the pair valve and solenoid.

Used the JD kit for jetting (BSR) with extended Kientech fuels crew (Thank you Rudolph)

I used the standard settings the South African guys use:

150 main jet

jd blue needle

clip 3

stock 22.5 pilot jet

2.75 turns fuel screw (too much???)

3x3 and standard exhaust.

Man what a difference.

Only problem now is the idling is a little rough.

Tried the warm engine, lower engine revs until just idling, turned fuel screw over 3 turns, no change.

A little more and the engine died. Dont know if this was the fuel screw or just the lumpy idling ,

Im thinking I missed something along the way.

Thank you

Manfred

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×