Jump to content
Sign in to follow this  

klx 400r jetting specs for ssw/mrd mod pipe

Recommended Posts

Please excuse if posted already, been looking for 2 days. Could someone please post exact jetting required.

I have the jd kit with keintech extended fuel screw, 3x3 mod done, stock motor, ride at sea level to 1,500 ft. Thanks in advance, Scott

Share this post


Link to post
Share on other sites

FCR carb, and I am gonna run stock fuel screw, Keintech extended fuel screw did not fit the carb for some reason. I opened up hole in bowel to fit extended screw but it would only thread in maybe 1 1/2 turns. Ordered it from TT store. Thanks, for your response Eddie.

Share this post


Link to post
Share on other sites

with your ssw/mrd mod pipe. thanks, scott

2003 klx 400r (e model drz)

fcr carb

jd jet kit

stock fuel screw (keintech did not thread into carb)

snorkel removed (3x3 mod)

stock motor

sea level elevation

ssw/mrd mod pipe (awaiting delivery)

right now it is jetted as follows:

65 jet

stock pilot

blue needle 4th clip

2 turns out on stock fuel screw

are these settings good with stock pipe now and when I install the ssw/mrd pipe?

Share this post


Link to post
Share on other sites

No problem, you are a busy man, yes 165 main, missed the 1. thank you for taking the time to answer my question. Consider this post closed.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×