drz 400 rear tail light/ blinkers

[RMoore604]

As any stock drz owner knows the rear brake light/blinkers mount is very big and ugly you would think te engineers at suzuki would come up with somthing more attractive. Any suggestions?

[ilsrwy27]

If you search you will find a lot of people like the Edge tailight.

They look great on the DRZ but are on the low end visibility wise.

[RMoore604]

but does it come w/ blinkers?

[ilsrwy27]

No, but you can buy or make brackets to install your blinkers.

http://www.wheelingcyclesupply.com/shop?action=category&cat_id=72

[RMoore604]

Awsome, thanks for the tips! One more thing haha, i noticed there are male/female style clips where the wires connect to one another, how do i make sure the wires on the blinkers i buy will fit in with the ones on my bike, or is this a universal thing were you can make em' fit?

[wvdualsport]

Yep, you'll have to make the new turn signals work (attach terminal ends). I cut off the ends of my factory turn signals (just before trashing them) then spliced the oem ends onto the aftermarket turns signals...then just plug them in and go.

[fttam]

Wiring in an Edge and turn signals is pretty straightforward and relatively simple......and the results are worth it as it looks fantastic.

[ebrabaek]

Or you can make your own....

Erling

[ikhoefnix]

i got the edge kit and 601 flashers. for the blinkers i just made the hole in the plastic mount for stock ones a little bigger and it works.

[Bmxguy]

I like the edge but I went with the UFO. It comes with blinkers! Looks way beter than stock and tucks everything into a small package..