Jump to content
Sign in to follow this  

1985 XL600R Rear Wheel Bearings

Recommended Posts

Hi guys I have one more question. I was replacing my chain and sprokets and noticed the rear bearings are all bad. One has a ring with 4 notches above it. It looks like i would need a special tool to remove this. It also looks like it has been staked to the hub. Can this be removed with a screwdriver or what is my next move? I figured i'd ask before i mess it up. Please advise, is there an easy way to do this?

thanks

jason

Share this post


Link to post
Share on other sites

There is a tool made to remove the lock ring, but you can use a brass drift and tap it loose being careful not to bugger it up, when you reinstall it be sure to punch it at the edges to keep it from backing out or use loctite on cleaned threads to secure it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×