Jump to content
Sign in to follow this  

Big bore 269cc combo with cams?

Recommended Posts

I've decided to do a big bore for the 06 250f :thumbsup:has any one done one with cams?i'm looking for a known working combo,i've read stock cam work well but i want to maximize the combo seeing it's a larger bore and all,please all comments welcome also would like to here from pro engine builders.

Share this post


Link to post
Share on other sites

Any one?Ron Hamp do you have a custom grid that you did for 09 build up?Would that cam grind work well?????

Share this post


Link to post
Share on other sites

I just put that kit in my bike and it runs like shit... i have both cams and mild porting, i went from 178 to 188 and to 165 in jetting and it still runs like shit. I been talkin to motor builders and they dont know what i should do to... feel like it runs out of gas on the top end.

Share this post


Link to post
Share on other sites

I am running hot cams stage 2. Main jet is a 160. Pilot is 45. I am running at sea level. I remember I had to go leaner on the main jet. Stock I was running a 175 main. Hope this helps.

Share this post


Link to post
Share on other sites

Im not sure what jets you should run but in with my experience it was leaner than stock settings. I posted my jetting specs above, but for me it was trial and error. Good luck to you.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×