Finally Got My New Pipe On

MRD... sounds awesome and is LOUD but havent tested it at the track yet.:worthy:




looks great!

looks great!


good exhaust,, my friend put a single side mrd on his 07 and loves it! beats the crap out of his $1k pro circuit duals

good exhaust,, my friend put a single side mrd on his 07 and loves it! beats the crap out of his $1k pro circuit duals

yeah mines an 07 too, and ive heard that too that people like it more than fmf and yosh too. it sounds great too

but do you see in my first pic how my graphics are coming off? ive tried superglueing, taping and nothing works, do you have any ideas?

damn yea that is tearing pretty good.. ive takin a fine grade sand paper to the plastics to roughen it up a bit, cleaned it, then used super glue.. has the piece of the graphic that took off still have any adhesive on it?

damn yea that is tearing pretty good.. ive takin a fine grade sand paper to the plastics to roughen it up a bit, cleaned it, then used super glue.. has the piece of the graphic that took off still have any adhesive on it?

nope, i was kinda dissapointed in the graphics, i bought it from one industries, i put them on right and followed the instructions, and they started coming off after about the 5th ride. it kinda sucks, i paid like $250 for the whole deal and now you cant just buy the shroud graphics, i called one industries and they said i would have to buy the whole new set with plastics and everything if i wanted to get replacments...:worthy:

yea im dealing with the same thing on my graphics, i do not want the seat cover but they only sell it as the kit..

yea im dealing with the same thing on my graphics, i do not want the seat cover but they only sell it as the kit..

yeah dude ive seen your bike, it looks tight, i would do ANYTHING to have a bike like that

Looks, Great , the header is awesome !

Looks, Great , the header is awesome !

thanks man, im liking it too:thumbsup:

thanks man, im liking it too:thumbsup:

i want to try and make my header look nice ,i got an titanium yoshimura header my friend said to try and polish or something , titanium would look nice , it already does but , it can look better

that mrd is stainless, the Titanium can be polished using a polish made for it..

Hope you have earplugs!

Use contact glue on the graphics.

I always wonder why the 3 holes are in the end cap of the muffler, it makes it sound a bit weird at low revs... I had a Bill's on my '08 and thought that was loud, until i got the MRD on my '09.

im not sure either,i havent taken it out yet. im still waiting for my foot to heal

damn, bout time for a new rear tire too.

MRD is nice, im going with one after i get my suspension set up for me.

yeah, it was fine until i headed out to this one track that i didnt know was hardpack till i got there and it was ruined at the end of the day

MRD makes some awsome pipes!

I loved mine, its now forsale if anyone is interested in an awsome pipe for half the cost of a new one, its used but in good shape, no dents or major scratches.

Only reason im selling it is becuase i sold the 250 that i was running the pipe on, i have no use for it anymore. Wont fit on my 450...haha

yeah man dave is a good guy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Brady The Honda Guy
      I recently put a newer style fender and plate on my 2007 crf250r. I just had to drill a couple holes in the fender and I used some washer on the back bolts to angle the fender up a bit. Since the original plate mounted with one bolt in the center and the newer styles mount with two bolts, I had to make a custom bracket. Message me if you need dimensions for this bracket. New style is in my cover photo, stock is in my profile picture.
    • By Brady The Honda Guy
      So I can get a 1986 cr250 motor for a good price and I also know a guy that has a 2005 crf250r that needs work. I have the idea of just swapping motors. Would this motor fit in the newer frame?
    • By Kevin from Wiseco
      Jeremy Martin Leads the Charge for Wiseco Riders at Daytona Supercross
      Christian Craig Turns in Career Best in 450 Competition
      MENTOR, Ohio (March 13, 2018) – Jeremy Martin showed the way for Wiseco-sponsored riders in Saturday night’s Monster Energy Daytona Supercross presented by Honda. In a season marred by bad luck and misfortune, Martin put together a near flawless ride to earn his first Eastern Regional 250SX Class podium finish of the season.
      Martin qualified eighth for the division’s annual visit to the World Center of Racing, finished fourth in his heat race, and came home second in the 250SX main event, missing his first win of the year by less than a second.

      “It’s Daytona, a real man’s track.” said Martin who sits fourth in points. “It was the toughest race of the year as far as fitness. I had to slow down a little bit, halfway through the main. I was getting close to (race winner) Jordon (Smith) and I was starting to think about where I could make a move on him, then I made some mistakes and he got away from me. Couldn’t quite get close again, but it’s good. We’re on the podium and in contention for wins again. That’s something I haven’t been able to say in supercross in a while. We want to get wins and now we know it’s coming.”
      Martin’s podium was a bright spot, but the rest of the event was rough for the GEICO Honda/Factory Connection squad. RJ Hampshire crashed hard in his heat race and had to be transported to a local hospital. He injured his back and ribs, but shoulder pain left him with the most concern.
      “I felt good on the bike all day,” said Hampshire via his Instagram account. “Had some pretty good speed and my foot just slid off hitting my shifter in those rollers during that heat race. After seeing the pictures from the crash I’m very thankful I didn’t take a shot to my head. I have some fractures in my T3/T4 in my back and ribs. Also have some damage to my lungs which is why I’ll be spending a couple nights in the hospital. I’ll be getting some more checkups this week on the shoulder also.”
      Cameron McAdoo, the third member of the team, was unable to compete at Daytona after being sidelined with a hand injury two races ago in Atlanta.
      Across the paddock, in the premier 450SX Class, Christian Craig got the call to fill in for Team Honda HRC. With the team’s regular riders Ken Roczen and Cole Seely out with injuries, it was up to Craig to carry the load for the factory team, and the upstart rider didn’t disappoint.
      The San Diego native was solid in both qualifying sessions, won his heat race and snagged the holeshot in the division’s main event. After relinquishing the lead to eventual winner Justin Brayton, Craig continued to show he was up for the challenge. The 26-year-old rider raced for second and third for most of the 20-minute-plus-one-lap feature before losing one more spot in the late goings to bring his No. 32 Honda CRF450R home fourth in the final rundown.

      “I had a great week testing with the team,” commented Craig. “They came down to Florida right after Atlanta and I feel like we really improved. Just getting more time on the bike and getting more comfortable was huge. I started off race day feeling really good. My qualifying position didn’t really show it, but overall I was happy with my riding. It’s all about having fun out there, and man, that’s what I did tonight. I was up front in the heat race, fell to third, but then the two guys in front took each other out so I ended up winning. You can call it luck or whatever, but I just put myself in a good position to capitalize on people’s mistakes."
      “I had a good gate pick and some confidence going into the main. I grabbed the holeshot and led for almost the first lap, but [Justin] Brayton got by me pretty quick. I stayed second for quite a while. I just rode my hardest and did my best. Unfortunately, a couple guys got by me so I ended up fourth. The track was so tough. This is only my second time racing Daytona and last year didn’t go well, so I really wanted to get some revenge this year. It’s better than the week before, but man, I was so close to a podium. I just need to keep putting myself in good positions and work on getting better each weekend.”
      Monster Energy AMA Supercross rolls on this weekend when the series visits the “Gateway to the West” for its annual race at the Dome at America’s Center in St. Louis. The 11th of 17 races on the 2018 supercross calendar will be televised live on FS1 Saturday, March 17, beginning at 8 p.m. Eastern Daylight Time, 5 p.m. Pacific.

    • By ThomasM.
      selling Hot Cams Valve Shim Kit that i bought for my 2005 crf250x, will also fit crf250r.
      used 1x 1.30 and 2x 1.55 shims. the rest is still there.
      $60usd shipped in the usa or canada
      please contact me for pictures or if you are not sure if it will fit your bike
    • By DirtRider250x
      Hi all,
      My main question is how can I make my 250r more reliable. I have owned it for 2 years and it was spent about 1 year in the shed probably needing new valves and piston rings (i have been putting it off) Will steel valves last longer and work well in the engine? Also, what are your thoughts of me selling it and buying something newer? is it worth it?