Jump to content
Sign in to follow this  

need help fast torqure specs

Recommended Posts

what are the torqure specs on the 8 10mm triple clamp bolts that hold the forks on a 2008 kx250f:bonk:

Share this post


Link to post
Share on other sites

I'm going off memory here, but i am 99% sure they are 15 ft-lbs. That's what i've been tightening mine to anyways :worthy:

Share this post


Link to post
Share on other sites

•Route the cables and hose according to the Cable, Harness,

Hose Routing section in the Appendix chapter. •Unscrew the upper clamp bolts [A].

○Apply a non-permanent locking agent to the bolts. •Tighten the fork clamp bolts.

Torque - Front Fork Upper Clamp Bolts: 20 N·m (2.0 kgf·m,

14.5 ft·lb)

Front Fork Lower Clamp Bolts: 20 N·m (2.0 kgf·m,

14.5 ft·lb)

NOTE

○Tighten the two clamp bolts alternately two times to ensure

even tightening torque.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×