Jump to content
Sign in to follow this  

WR450F 03 won't kickstart cold

Recommended Posts

I have a WR450f 03', the starter motor has always been a problem, but worst still it almost always gives me a hard time trying to kick start it cold, sometimes it will but not often. When it's hot, no worries. It has a new plug and gets good spark. Is this a jetting or valve clearance problem?

Share this post


Link to post
Share on other sites

Tight valves create hard starting at any engine temperature.

What jetting are you running? You might be a bit lean on the pilot jet, you should be running a 48.... I think, check the jetting database.

Share this post


Link to post
Share on other sites
Tight valves create hard starting at any engine temperature.

What jetting are you running? You might be a bit lean on the pilot jet, you should be running a 48.... I think, check the jetting database.

Thanks mate, I took the carby off and will check that as i'm not sure

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×