Suzuki Removing silencer question.

[afraid2fly]

I have removed the little bolt out of the bottom and have squirted WD-40 all around it and still can not get it to budge. Any ideas?

[Squid Master]

Do you have access to a torch? You could try putting a little heat on it but be careful not to melt anything. I had a similar problem and you need to break the seal where the silencer comes apart. You could break the seal with a utility knife blade or very small flat head screw driver - then apply heat to the entire area and whack it with a dead blow mallet. Good luck!

[quadman450]

Maybe use a chizzle and hammer nicely