pics of your atc 110
I have a 1990 Suzuki RMX250 for sale. It was bought from a friend who bent the crank back in 2000 and took it completely apart (down to the nuts, bolts, and washers). The frame was powder coated black. New crank case bearings, new gaskets for crank case, cylinder, and cylinder head. All transmission bearings were cleaned and checked for wear or damage. The crank was rebuilt and balanced by a local Harley shop. New OEM piston and rings. Cylinder and head are in excellent condition and worth almost as much as the entire bike, I think. Brand new FMF Gold Fatty pipe. New front and rear Renthal sprockets and new D.I.D. chain. New grips. Includes the original headlight and odometer (not shown), Mikuni TM38 carb has been cleaned and rebuilt. Seat is original and in perfect condition. Runs perfectly. Could use some new plastics, new foot pegs, front fork seals, rear tire, and a tune by someone better than I. Pink slip in hand, but hasn't been registered in years. Will throw in a Clymer manual. The bike is a rocket and too tall for my 5'9" frame. I'd like something a little more convenient to ride with my young kids. Asking $1800 OBO. Serious inquiries only please. Price doesn't include any shipping.
Hey guys I just bought a bike last night. So the seller said the bike will turn on but then die. We didn't try it because it was really late at night and it was raining (seat was wet). But he said if you bump start it, it will turn on and ride. So what do you think the problem is? I just want to make sure it runs... I probably won't be able to bump start it till Saturday (rain)... It's a four stroke, and I know absolutely nothing about them. Thanks.
I have recently been having problems with my honda mtx 125. It will run great for 10 minutes then it will die on me if i give it any throttle. The bike will idle fine but cuts out if I give it any gas. When I let it Idle for 1 minute it will work fine for another few minutes then the same problem happens.
I have adjusted the carburetor many times to see if it was because its too lean or rich but the problem happens either way. I am running 40:1 fuel mixture. I recently replaced the head gasket and I noticed the piston needs replacing as its very worn, could this be the problem?
Any advice/help would be greatly appreciated!