Jump to content
Sign in to follow this  

What is this connection (Keihin FCR 39mm )

Recommended Posts

Does somebody know what in have to connect to this.

I used all my free hoses on my drz, and don't know what to connect at this double nipple.

What should i do with the part that look like a choke with a hose.

(just below the carb on the pic)? Do I need this on my drz?

39carb.jpg

DRZ 400 S (2000)

Tnx in advance

Share this post


Link to post
Share on other sites

the double nipple is a vent line and the pic on the bottom is the hotstart.im asuming this carb came off an E model drz

Share this post


Link to post
Share on other sites

you have a yamaha carb.

if you intend to keep the coast enrichener you need to remove the "T" fitting and connect that hose on the carb to a vacuum nipple installed in the the cylinder head.

the other item you have indicated it the hotstart valve from the yamaha.you wont be using it.

if it were mine i would remove the CE and connect the left over nipples in the carb together with a short peice of left over hose.

Share this post


Link to post
Share on other sites

Thanks eddie & mickydee for the fast reply, Im actually working now on it.

Perfect.

I'm trying to understand what you all are saying. Post reply asap

Share this post


Link to post
Share on other sites
the double nipple is a vent line and the pic on the bottom is the hotstart.im asuming this carb came off an E model drz

I don't know micky, a friend gave the carb to me.

I told him that i own a 400 s and that they are know for their crappy carbs.

Share this post


Link to post
Share on other sites
I don't know micky, a friend gave the carb to me.

I told him that i own a 400 s and that they are know for their crappy carbs.

well Eddie just said it came from a yamaha so you have a yamaha carb.

Share this post


Link to post
Share on other sites
you have a yamaha carb.

if you intend to keep the coast enrichener you need to remove the "T" fitting and connect that hose on the carb to a vacuum nipple installed in the the cylinder head.

the other item you have indicated it the hotstart valve from the yamaha.you wont be using it.

if it were mine i would remove the CE and connect the left over nipples in the carb together with a short peice of left over hose.

Ok eddie,

Ill follow your advice and remove the CE and dont use the hotstart

I don't know what a ce is so again here are some pictures.

This is a CE?

1.jpg

And this is the result if the CE is removed.

In the ce was a litle oring and a spring.

Should stay this open???

2.jpg

Tnx

Share this post


Link to post
Share on other sites

Just googled what a CE is.

I found it.

The pictures are correct.

I'll remove the ce Eddie, on the pics is only the removal of the little piece of the CE.

I'll remove it completely and block of al nipples that was connected to the CE.

Tnx again

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×