Jump to content
Sign in to follow this  

Parts Interchangability...

Recommended Posts

What year ranges can be interchanged with a 1996 YZ 250 for parts? Parts such as exhaust and plastics.

Share this post


Link to post
Share on other sites

Does that also include the pipe? And how about the year range for the rear mono shock?

Share this post


Link to post
Share on other sites

Pipe (expansion chamber) from 97 or 98 doesn't fit to 96 because the connection to cylinder differs.

Share this post


Link to post
Share on other sites

Good to know, I just bought a rebuilt motor locally from a 98. So i'll be needing an expansion chamber from a 98. Is there any other differences in mounting? And what year ranges will work with the 98 chamber?

Share this post


Link to post
Share on other sites

Expansion chamber from 97 or 98 will work with your 98 motor.

As far as 98 engine mounting points lining up with 96 frame I don't know.

They should because these motors are very similar.

One more thing to take in mind is that the intake side of the cylinder changed in 97 and you cannot connect older reed blocks to it (96 and previous have 4 screws but 97 and onwards have 5 screws).

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...