Jump to content
Sign in to follow this  

hanging idle?

Recommended Posts

2009 S model. Has always run perfect but the idle started to hang up yesterday. When the throttle is closed it takes several seconds for the RPM to return to idle.

I've been running a Dynojet stage 1 jet kit with the 3x mod for the last 6 months and it has run perfect.

25 pilot

140 main

Fuel screw +/- 2.5 turns out

Is this likely a vacuum problem? Or??

Any suggestions appreciated.

Share this post


Link to post
Share on other sites

Probably the wires or slide hanging , check the wires first.

Share this post


Link to post
Share on other sites

I bet it's crap in the carb, mine does it, i take the bowl off, blow out the jet's and it's ok again, not sure where the dirt is but it always seems to work, shame it's such an ass to remove the carb.

Share this post


Link to post
Share on other sites

Most likely,cold air temps or dirty pilot is causing a lean idle condition,leading to the idle hang.

Share this post


Link to post
Share on other sites
probably a blocked pliot jet

make sure the throttle freeplay is adjusted correctly when you refit the carb

drain the floatbowl occasionally .

+1

Blocked pilot jet and or circut.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...