anyone use these tires?

Any one use these tires before?:Dunlop,D607,D604,Trailmax.

I also noticed that Dunlop gives different rear tire size recommendations on their Fitment guide site? Example:Trailmax tire 120/90/18---D606 tire 130/90/18.The front tire varies a little--90/90-21 vs. 3.00-21.

I'm confused,why would they give different recommendations?.Any info on the use of the above mentioned tires and the size question would be great.

Thanks Frog13:worthy:

Jesus/Muhammad/Allah recommends a:

Pirelli Scorpion Front tire &

Maxxis Desert IT tire in the rear

look nowhere else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Charles Mrizek
      This replaces part 9 in the exploded parts diagram for the 85 86 87 xr600r.
    • By XR-CJ
      I have this issue several times and cannot seem to figure it out. The four clutch spring bolts are the weakest bolts I have ever come across. I am not sure what the torque specs are, have the shop manual, have searched online and I can only guess it's around 4 ft/lbs. I have been told 8 and they seem to break every time around 7.
      What is the proper torque for these bolts?
      Should I find stronger bolts? I would still stick to the proper torque, but feel as if these things are butter.
    • By XR-CJ
      Prior to reassembling the case, I tested the shifting and it seems the center fork attached to the shaft seems to stick at the steepest section of the drum. I have cleaned and tested all forks and surfaces for smooth movement, tried it with silicone and oil. With very little help, it seems to shift ok, but without the help, it binds.
      Can I assume that once it is together the oil lines are attached and oil is added to the case, the binding will stop? I have tested every scenario short of assembling the entire motor.
      Should I be able to successfully test the shifting with the case apart?
    • By Charles Mrizek
      contact me if you're interested.