Jump to content
Sign in to follow this  

kx 250 help..!!!

Recommended Posts

Hi Guys , Im newbie here and need some advice..!!

The previous owner welded over the sump plug hole due to a crack or something.!! is there any other way to drain the oil out of the transmission..!!

Thanks in advance ..:ride:

Paul

ps i hope this is in the right section..

Share this post


Link to post
Share on other sites
Hi Guys , Im newbie here and need some advice..!!

The previous owner welded over the sump plug hole due to a crack or something.!! is there any other way to drain the oil out of the transmission..!!

Thanks in advance ..:ride:

Paul

ps i hope this is in the right section..

You can always loosen some screws on the lower half of the clutch cover and tip your bike over a bit. :ride:

I think if I had to choose between completely stripping an engine to replace a cracked case at the oil drain and tipping the bike over after loosening the screws, I'd go that route too. (probably his thinking on why he welded up the hole)

Share this post


Link to post
Share on other sites

Thanks notarat..

I have to change the clutch plates anyway so i should get most of the oil out that way great..

Thanks a mil i really didnt want to strip the bike.,,:ride::ride:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×