Jump to content
Sign in to follow this  

Fcr gasket , separate the carb body etc .

Recommended Posts

Does anyone has the link fro that company who makes the gasket for the fcr-fcrMX ? A buddy separated the carb body from his fcrMX and he is looking for this gasket , any help would be appreciate :thumbsup:

Share this post


Link to post
Share on other sites

The original gasket should be reusable. I have separated my FCR carb in the past and found that the original gasket was still in perfect condition.

Share this post


Link to post
Share on other sites

ya i just did a idle mod on an FCR and i split it to make the job easier no problems here except for the one tamper prof screw ,i got it out but a longer T20 would of been helpful

Share this post


Link to post
Share on other sites

Great information just what I was looking for. Can someone tell me what the idle mod is?

Share this post


Link to post
Share on other sites
Great information just what I was looking for. Can someone tell me what the idle mod is?

ya sure , remember all fcr carbs are not the same .

this mod is done by many ltz400 guys using a yfz450 carb and is only done after the TPS is removed.

i take the carb apart to make it easer to get to the places that have to be delt with

carbboot076.jpg

hole has to be drilled

carbboot077.jpg

and taped

carbboot079.jpg

idle adjusting parts are removed from the stock BSR carb and treaded in to the hole

9-21-2007LS022.jpg

knob bracket is modded to fit

9-21-2007LS025.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×