Jump to content
Sign in to follow this  

kick stand kill switch

Recommended Posts

I removed my harness from under the seat down to the kick stand. Then I made a jumper wire to plug back into the connector under the seat. No soldering needed & it can be reconnected.

JD

Share this post


Link to post
Share on other sites

I used a piece of aluminum angle that bolts up behind the switch and holds it closed like the kickstand is in up position.

Share this post


Link to post
Share on other sites

I cut the two wires about an inch and a half past the plug under the seat soldered the wires together used a little heat shrink wrap good as new :thumbsup: and unbolted the junk kill switch!!!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×