Jump to content
Sign in to follow this  

'09 te 510

Recommended Posts

Just picked up a new 09 TE 510 on saturday. my pipe should be in sometime this week, when it comes in, I'm gonna have the "race prep" done. I know i'm gonna have to re spring it for my big arse, but besides that, any advise on must do mods, breaking it in,......holding the clutch in b4 you use the magic button:bonk::thumbsup::bonk:. this is my third husky( '86 400 enduro 2t, '99 te 610), but first fuel injected and magic button. thanx in advance:thumbsup:

Share this post


Link to post
Share on other sites

Im a huge fan of finding some steep roads and putting some torque on that engine. Its extremely important for the rings to set properly, this happens very early in the break in. The worst thing u can do is run it cold. just start the bike let it fully warm up and go have a blast. Go ahead and disable that clutch switch, I had my wires pull out on a crash and I had to kick start it all day until i realized the wires came out.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×