Jump to content
Sign in to follow this  

After putting JD Jetting kit in 06 yz450 its hard to start

Recommended Posts

Ok, so I was having some off idle hesitation on my bike. I decided to get the JD jetting kit to fix this. After installing the red needle, clip in 5th position from top, 45 and 48 pilots, 170 main and doing the oring mod the bike is horrible to start(hot or cold). The temp was 58 degrees, about 400 feet above sea level. The only way to start it is to open the throttle fully and kick and it will start in a few kicks. I had it jetted 45 pilot and 170 main and it would bust right off before I put the kit in. Once it is starts with the new kit,everything is perfect. Fuel screw is 1 1/2 turns out. Thanks for the help.

Edited by mdhudson

Share this post


Link to post
Share on other sites

Just for the heck of it I go to the garage and try to start the bike and bam, it starts first kick. What in the world could have happened?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×