Jump to content
Sign in to follow this  

how much engine oil ?

Recommended Posts

fill it up to the top mark on the dipstick( dipstick not threaded in) usually around 3/4 of a quart to fill it.. then crank it over a few times holding the killswitch then start it for about 10-15 seconds, kill it let it sit for a min or two then top off again to the top mark on the stick..

Share this post


Link to post
Share on other sites
fill it up to the top mark on the dipstick( dipstick not threaded in) usually around 3/4 of a quart to fill it.. then crank it over a few times holding the killswitch then start it for about 10-15 seconds, kill it let it sit for a min or two then top off again to the top mark on the stick..

Ahh, Tim. One smart man. :thumbsup: Love ya!

But anyways, for engine oil you can just pour in 700ml (or 0.73 US Quarts). Check the dipstick. Good luck!

Share this post


Link to post
Share on other sites

or you can do 700 ml.. haha i did 700 on my bike and it was a tad shy of the top mark.. i like my bike spot on :thumbsup:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×