Jump to content
Sign in to follow this  

Suddenly wont start or idle

Recommended Posts

I recently found I had the Oil migration problem. Thaught I fixed it but installed the RT crank seal wrong.

At the same time the bike suddenly stopped starting. I was able to bump start it while bliping the throttle. It also dies at anything less than 1/4 throttle.

I am guessing that the Pilot Jet is clogged and this is my problem. I only had a quick chance to glance and the fuel screm was still in.

The rt crank seal was wadded/ ripped up pretty bad. Could the friction of the crank seal miss alligned rubbing on the beering have prevent the engine from spinning freely?

I guess I will know when I get it back together and check the Pilot Jet, but I can not check it for a few days...

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this