Jump to content
Sign in to follow this  

Cant find this oil leak !!

Recommended Posts

So my bike has developed this crazy oil leak(gearbox), I do not know where its coming from......I took the power valve cover off to see if the shaft seal had gone but there was no oil in there......but it would seem its the only place it could be coming from?

I want to change the seal anyway, is it pretty easy? Anyone done it...

Any Ideas ?

Rekluse001.jpg

Share this post


Link to post
Share on other sites

Nope its not plugged, are you thinking its two stroke or gearbox oil?

How easy is it to change the shaft seal? Do I need to split casings?

Share this post


Link to post
Share on other sites

If you are talking about the lower shavt seal you have to drain tranny and coolant, remove exhaust(just to make it have more room) remove rear brake lever and then the right crank case cover, when that off remove the coverner from the case cover, remove 2 alen head screws from shaft, remove shaft and then replace seal. IF you are going to do the upper seal , remove linkage rod from power valve rod and try to pick out the seal from the cylinder and then slide the new one in.

Share this post


Link to post
Share on other sites

thanks cookiemonster:thumbsup:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×