Jump to content
Sign in to follow this  

Idler gear - is this correct

Recommended Posts

Guys,

I'm pretty sure this bit is the bit spoken of in the stator/starter loctite fix FAQ whereby the manual has the washers (shims) in the wrong place?

I've got the circlip at the back with the shim behind it (I've not removed that or the shaft)

Then 1 shim infront of the circlip, then the gear on top.

Sorry for all the questions, but the fiche appears to show 2 gears whereas mine is one long gear.

I don't want to make any mistakes so if someone could confirm this is right I would appreciate it!

normal_IMG00059-20100304-2158.jpg

Cheers,

Con

Share this post


Link to post
Share on other sites

That's how I have it then ^^^^ :thumbsup:

What holds the gear on? the case presumably? I'm not near the bike now, called it a night.

Share this post


Link to post
Share on other sites

You have it installed correctly. The gear floats on the shaft and rides against the cover.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×