Jump to content
Sign in to follow this  

XR/XL 200 stator help

Recommended Posts

Hey , I have an Australian 1982 XR200r. They came out with Headlight/blinkers /horn etc but no battery. They have 3 coils in the stator. 1for ignition (Black/Red) , 1 for headlight (white/yellow) and 1 for blinkers / horn. (pink and yellow non grounded) Voltage is all good for ign and light circuit. When I measure voltage of pink and yellow using Y as + and P as - i only get max 7 volt pre regulated AC. It is a 12V system. Does this sound correct or am I measuring it incorrectly ? It seems to drop a few volts when it goes to the reg/rec. Help appreciated! :thumbsup:Thanks.

Share this post


Link to post
Share on other sites

Possibly in the USA but over here XL 185's were 6V and XR 200r's where 12V.

I think I am measuring it incorrectly somehow?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×