Jump to content
Sign in to follow this  

Rekluse setup

Recommended Posts

Ok got the inch of free play with the clutch lever at half throttle. But when in first gear with the clutch pulled in and the throttle at 1/4 to 1/2 the bike stays still. But any more and it wants to start moveing forward. Any one else had this happen thanks

Share this post


Link to post
Share on other sites

You have too much play in the lever. The easiest way to set up your lever is to ride the bike in a large open area. At full throttle in the upper RPM range you only need 1/4 to 3/8 of an inch freeplay in the lever.

Share this post


Link to post
Share on other sites

It seems like i'll have the adjuster completey out. Will it hurt it with that slack

Share this post


Link to post
Share on other sites

Mine is not completely out but close to the end. ASV lever.

Share this post


Link to post
Share on other sites

What bike is it? Which Rekluse model is it?

There should be an adjustment somewhere in the cable. Find that and adjust it so that the adjuster on the perch is somewhere in the middle of it's range.

Having more slack at the lever won't hurt anything but not having enough slack will fry the clutch. You should be able to rev the bike in gear with the clutch pulled in without the bike moving.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×