Jump to content
Sign in to follow this  

Jetting options for bone stock 09 SM

Recommended Posts

Hey everybody,

Long time lurker, first time poster here.

My question is, are there any jetting options that would be applicable to a completely stock 09SM?

I thought I had a clogged pilot jet due to a slight lean-surge at 1/4 throttle but upon removal of the carb and pilot jet it appears spotless and I have now read that it appears to be a normal quirk of the stock jetting.

I have a JD jet kit on hand as I'm gathering parts for future mods (pipe, 3x3 etc) but I don't want to do the 3x3 until after the first service and valve check (the bike has less than 500km on it currently).

So would any of the parts from the JD kit be any better than the stock parts on an otherwise stock bike?

Thanks.

Share this post


Link to post
Share on other sites

Do your 3x3 mod now and re-jet! Why wait. If your getting a exhaust then you will have to change the main jet again when you install it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×