Jump to content
Sign in to follow this  

kx100 tranny problem.

Recommended Posts

So we were at a 2 day race this weekend.My son was having a hard time putting his bike in 1st gear.Like it was sticking.I tried it it seemed fine except a bit notchy.Then sunday the bike was in 1st gear getting into staging.It would not come out of 1st gear now........now there is like no tension at all.The shifter just goes up and down and it feels like its not touching anything in the tranny. Anybody have any ideas?????

Share this post


Link to post
Share on other sites

That Happened to my freinds KX100, A small bit of metal from somewhere was stuck between the sliding Pawl of the shifter Arm. The spring couldn't move it. Had to remove the whole clutch side cover and remove the Clutch basket and take out the whole shiter Arm just to see what was sticking the slide pawl from moving.

Found that small metal sliver stuck between the pawl and the arm, the spring was okay.

There's a Thread in here on the with Pic's on what you're looking at when you remove that side cover also tells you how to reSet the powr valve arm. Do a Search.

Share this post


Link to post
Share on other sites

Well i pulled it apart and we have a chipped toth on one of the gears.....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×