Jump to content
Sign in to follow this  

How do I remove my MRD pipe's quiet core??

Recommended Posts

Guys,

I have a MRD pipe on by CRF450 and I need to remove the quiet core. I removed the three allen screws and took off the end cap with the quiet core installed, then I removed the small allen screw that was in the top hole. I can't get the quiet core out. I have never taken it out before and don't have instructions. Can you help?

Share this post


Link to post
Share on other sites
Guys,

I have a MRD pipe on by CRF450 and I need to remove the quiet core. I removed the three allen screws and took off the end cap with the quiet core installed, then I removed the small allen screw that was in the top hole. I can't get the quiet core out. I have never taken it out before and don't have instructions. Can you help?

you have done the correct steps , it sounds like the core has pushed up a burr that is holding it in , you can tap it out from the other side with a dowell or such :banana:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×