Jump to content
Sign in to follow this  

Suzuki 150 Carb. on a TTR 125?

Recommended Posts

Will the carburetor off a Suziki 150 be too large for a TTR 125? Not specific on the make of the Suzuki, but Would it be worth a try?

Share this post


Link to post
Share on other sites

if its cheap to get i would give it a try, probably gonna have to do some jetting though

Share this post


Link to post
Share on other sites

Oh absolutely, that wouldnt be a problem...and it will be cheap, maybe free even :banana: Thank god for friends with spare parts lyin' around haha. Thanks for the info bud, I'll try it out

Share this post


Link to post
Share on other sites

Measure the diameter of the intake side, if it's under by 1mm you will end up tearing boots and giving yourself a headache with a lean jetted bike as you'll be taking the carb on and off to jet. Eventually I created an adapter and epoxied it on, that was a huge step forward.

I used a 28mm. Similar to one found a YZ80 or the non-pumper version of one found on a non-California emissions DRZ250.

-Kerry

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×