moto_psycho Posted March 24, 2010 I have an fcr39 for my DRZ. Do I need anything else to fit it? Share this post Link to post Share on other sites
suzuki sm nut 123 Posted March 24, 2010 is it the TT kit ? If so, you should be allset. If not what do you have Share this post Link to post Share on other sites
Smias My Ride Posted March 24, 2010 Is it a ready kit like the TT kit or did it came from an other bike and so what bike it was ? Share this post Link to post Share on other sites
moto_psycho Posted March 24, 2010 its literally just the carb from a drz400e. thats all i have. Share this post Link to post Share on other sites
Smias My Ride Posted March 24, 2010 You need 'E intake manifold , Sudco adapter , 'E cables . Do you have the 'E air boot ? Share this post Link to post Share on other sites
moto_psycho Posted March 24, 2010 nothing but the carb 👍 Share this post Link to post Share on other sites
moto_psycho Posted March 24, 2010 is this kit available as 1 bunch? Share this post Link to post Share on other sites
suzuki sm nut 123 Posted March 24, 2010 call sudco, they may have a kit or check with TT store. but I think it must be bought sepritley Share this post Link to post Share on other sites
Smias My Ride Posted March 24, 2010 From a Sudco dealer : 021-216 FCR Adapter 2 3/8", carb to S airboot 021-439 Adaptor O-Ring 021-012 Airboot adapter bolts (2) and from a Suzuki dealer : P/N 13111-29F00 OEM Suzuki E Intake Manifold P/N 09402-58208 OEM Suzuki Clamp If your petcock is vacuum operated (ON PRI RES) you will need also P/N 13685-29F00 OEM Suzuki Vacuum Port Nipple from Suzuki . Share this post Link to post Share on other sites
moto_psycho Posted March 25, 2010 do i need all those parts, or is it just suzuki or sudco? Share this post Link to post Share on other sites
Smias My Ride Posted March 25, 2010 Suzuki and Sudco , i think in UK Allens performance is the Sudco dealer , look here :http://www.drz400uk.org/index.php?sid=36f6a6c3c40bae2b46f8b6ae63ffb61b Share this post Link to post Share on other sites
moto_psycho Posted March 25, 2010 by the looks of this carb all i need is the throttle cables then. its got the carb to engine rubber, its got the carb to airbox extension. it came from a DRZ.... straight on fit? Share this post Link to post Share on other sites
moto_psycho Posted March 25, 2010 https://thumpertalk.com/forum/showthread.php?t=889279&page=2 just read this post also. my bike doesnt have the pipe from the inlet manifold. is it possible to just cap off the coast enricher for the time being? Share this post Link to post Share on other sites
