Jump to content
Sign in to follow this  

Just replaced timing chain after alot of hours

Recommended Posts

Well I decided to check my valves one intake was tight so I removed the cam to shim it and dropped a shim down timing chain hole M.F@@!%%% :bonk:I know better than that but was trying to hurry so I decided to change the timing chain too while I was in there and found this it looks like chain hit it1_CRF450R.015_1_.jpg

Share this post


Link to post
Share on other sites
1_CRF450R.015_1_.jpg

Its the oil strainer mount under the crank Im looking for the part #

please help I need to RIDE BEEN TWO WEEKS or bend it back is it a 90 degree bend ?

Share this post


Link to post
Share on other sites

Part number 11206-MEB-670

its a cam chain guide plate, its supposed to have a bend in it like that. but not sure the degree of the bend to see if yurs is over bent.

Share this post


Link to post
Share on other sites

That plate holds the cam chain close to the gear on the crankshaft. It is there to prevent the chain from falling away from the gear whenever the chain is loose. IE: changing the head , cam , chain tensioner.

I had accidently bent my bracket like that in your picture. I took it off and bent it back up, closer to the gear. And all is well.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...